DIGITUS HDMI EXTENDER SPLITTER SET 1X4

Expands the maximum length of an HDMI input signal up to 40 m via a network cable, distributing it to up to four monitors/displays Expands the maximum length of an HDMI input signal up to 40 m via a network cable , distributing it to up to four monitors/displays Supports CAT 6, CAT 6A, CAT 7 network cables EDID switch - allows you to configure the resolution and audio format on the transmitter unit Supports PoE (Power over Ethernet) - only power required a unit (transmitter) with power Highest supported video resolution: 1080p / 60 Hz HDMI Loop Output - allows connection of a local monitor to the transmitter unitThe Digitus HDMI Separator Kit, 1x4 provides an extension solution as well as separation, up to 40 m for the most demanding requirements. It transmits digital audio and video signals up to a maximum length of 40 meters, distributing them to up to four monitors/screens. The highest supported video resolution is 1080p/60Hz. An EDID switch is located on the transmission unit, through which the resolution as well as the audio format of the output signal can be adjusted. The transmitter also has an HDMI loop output, which allows the connection of a local monitor. Thanks to the PoC (power through cable) functionality, only the transmitter unit needs power. Four infrared units (1x transmitter, 4x receiver) are included in the scope of delivery, through which remote control of the connected input sources can be used.

Weight: 1.39 kg

Length: 293 cm

Width: 270 cm

Height: 70 cm